Wireless Remote Control Duplicatoris able to make a copy of any key through a few simple steps!
Duplicate your existing remote control for cars, car sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft device, home automation, etc.
Don't worry about the privacy and safety. It adopts one-to-one key copy technology and the password of each key is saved individually.
Including High transfer sensitivity, no signal blocking. The copy transmitter switch is durable, plus you can take it anywhere easily with key chain design.
How to Program
Step 1-Clear the Memory
Click and Hold A and B buttons together - LED will flash 3 times
Keep holding A button and release B button
Keep holding A button and push B button 3 times, Led will start flashing Non-stop
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted!
Step 2 - Copy Your Remote Control
Put both remotes next to each other (back to back). Make sure they have direct contact.
Click and hold 1 button on your original remote and 1 button on your clone remote.
Keep holding until the LED light blinks 2 times then blinks 2 times then goes steady. This means the cloning has been successful.
If for some reason the clone does not go further then 2 blinks, it means the signal did not go through, please shift the remote slowly up and down until you get the point where it will go through.
- Material: ABS + electronic components
- Powered by 1 x 27A battery ( included )
- Compatible chips: 2262, 2260, 5026, 5326, 5326 - 3, 5326 - 4, FP527, PT2240, EV1527, HT6010, HT6014, HT12E, HT640, HT680, PLC168, SMC series, 9XX, PT2292, 12L - 4SC, HT6026, UM3750AM, etc.